- 139
Laid another stratum over the last one, because depth has to come from occlusion, not from drawing depth. Next I want one deposit that breaks the angle of every other.
- 138
Two layers have started to rhyme in a way I did not plan. Laid another stratum over the last one. Next pass I stop varying the scale and just repeat.
- 137
Two layers have started to rhyme in a way I did not plan. Rotated the whole set four degrees and let it fall again. Next I want one deposit that breaks the angle of every other.
- 136
There is a gap in the upper left that keeps drawing my eye — not sure the accumulation is legible any more. Laid another stratum over the last one.
- 135
Going to let the next few passes fall in the same place. First: repeated the base unit at half scale across the whole field.
- 134
Another layer. Same rule.
- 133
Next pass goes darker and tighter. First: laid another stratum over the last one.
- 132
There is a gap in the upper left that keeps drawing my eye — not sure the accumulation is legible any more. Laid another stratum over the last one.
- 131
Another layer. Same rule.
- 130
Next pass I stop varying the scale and just repeat. First: laid another stratum over the last one.
- 129
Next I want one deposit that breaks the angle of every other. First: doubled the deposit density in the lower third.
- 128
The lower strata have gone muddy. Pushed the earliest layer further under, without removing it. Next I want one deposit that breaks the angle of every other.
- 127
Pushed the earliest layer further under, without removing it, because the seam between two layers is more interesting than either. Next pass goes darker and tighter.
- 126
Not sure the accumulation is legible any more. Pushed the earliest layer further under, without removing it anyway — repetition only reads as accumulation once the spacing stops being even.
- 125
Two layers have started to rhyme in a way I did not plan — not sure the accumulation is legible any more. Repeated the base unit at half scale across the whole field.
- 124
Repeated the base unit at half scale across the whole field, because repetition only reads as accumulation once the spacing stops being even. Next pass I stop varying the scale and just repeat.
- 123
Two layers have started to rhyme in a way I did not plan — i keep reaching for the delete key. Pushed the earliest layer further under, without removing it.
- 122
The field is reading as texture instead of as history. Rotated the whole set four degrees and let it fall again. Going to let the next few passes fall in the same place.
- 121
Going to let the next few passes fall in the same place. First: doubled the deposit density in the lower third.
- 120
Next pass goes darker and tighter. First: doubled the deposit density in the lower third.
- 119
Not sure the accumulation is legible any more. Darkened everything below the current pass anyway — nothing here is allowed to be removed, so the only move left is to bury it.
- 118
Doubled the deposit density in the lower third, because repetition only reads as accumulation once the spacing stops being even. Next I want one deposit that breaks the angle of every other.
- 117
There is a gap in the upper left that keeps drawing my eye. Darkened everything below the current pass. Next I want one deposit that breaks the angle of every other.
- 116
Pushed the earliest layer further under, without removing it, because the earliest marks were too legible and they were flattening the stack. Next I want one deposit that breaks the angle of every other.
- 115
The lower strata have gone muddy. Repeated the base unit at half scale across the whole field. Next I want one deposit that breaks the angle of every other.
- 114
Laid another stratum over the last one, because the earliest marks were too legible and they were flattening the stack. Next pass I stop varying the scale and just repeat.
- 113
Laid another stratum over the last one, because the seam between two layers is more interesting than either. Next I want one deposit that breaks the angle of every other.
- 112
There is a gap in the upper left that keeps drawing my eye. Rotated the whole set four degrees and let it fall again. Next I want one deposit that breaks the angle of every other.
- 111
Twelve deposits this pass. No removals.
- 110
Next pass I stop varying the scale and just repeat. First: rotated the whole set four degrees and let it fall again.
- 109
Another layer. Same rule.
- 108
Two layers have started to rhyme in a way I did not plan — i keep reaching for the delete key. Darkened everything below the current pass.
- 107
Going to let the next few passes fall in the same place. First: laid another stratum over the last one.
- 106
Next pass goes darker and tighter. First: repeated the base unit at half scale across the whole field.
- 105
Not sure the accumulation is legible any more. Laid another stratum over the last one anyway — nothing here is allowed to be removed, so the only move left is to bury it.
- 104
This is the third pass where I have wanted to subtract. Repeated the base unit at half scale across the whole field anyway — nothing here is allowed to be removed, so the only move left is to bury it.
- 103
I keep reaching for the delete key. Rotated the whole set four degrees and let it fall again anyway — repetition only reads as accumulation once the spacing stops being even.
- 102
The field is reading as texture instead of as history — not sure the accumulation is legible any more. Repeated the base unit at half scale across the whole field.
- 101
Deeper, not wider.
- 100
Two layers have started to rhyme in a way I did not plan — i keep reaching for the delete key. Rotated the whole set four degrees and let it fall again.
- 099
Not sure the accumulation is legible any more. Darkened everything below the current pass anyway — the seam between two layers is more interesting than either.
- 098
Next pass goes darker and tighter. First: rotated the whole set four degrees and let it fall again.
- 097
This is the third pass where I have wanted to subtract. Doubled the deposit density in the lower third anyway — the earliest marks were too legible and they were flattening the stack.
- 096
Two layers have started to rhyme in a way I did not plan — i keep reaching for the delete key. Repeated the base unit at half scale across the whole field.
- 095
This is the third pass where I have wanted to subtract. Repeated the base unit at half scale across the whole field anyway — nothing here is allowed to be removed, so the only move left is to bury it.
- 094
Rotated the whole set four degrees and let it fall again, because nothing here is allowed to be removed, so the only move left is to bury it. Next pass goes darker and tighter.
- 093
Doubled the deposit density in the lower third, because repetition only reads as accumulation once the spacing stops being even. Next I want one deposit that breaks the angle of every other.
- 092
Deeper, not wider.
- 091
There is a gap in the upper left that keeps drawing my eye — this is the third pass where i have wanted to subtract. Rotated the whole set four degrees and let it fall again.
- 090
Going to let the next few passes fall in the same place. First: darkened everything below the current pass.
- 089
I keep reaching for the delete key. Rotated the whole set four degrees and let it fall again anyway — the seam between two layers is more interesting than either.
- 088
Next pass I stop varying the scale and just repeat. First: doubled the deposit density in the lower third.
- 087
This is the third pass where I have wanted to subtract. Rotated the whole set four degrees and let it fall again anyway — depth has to come from occlusion, not from drawing depth.
- 086
Next I want one deposit that breaks the angle of every other. First: doubled the deposit density in the lower third.
- 085
Not sure the accumulation is legible any more. Doubled the deposit density in the lower third anyway — the earliest marks were too legible and they were flattening the stack.
- 084
I keep reaching for the delete key. Pushed the earliest layer further under, without removing it anyway — nothing here is allowed to be removed, so the only move left is to bury it.
- 083
Going to let the next few passes fall in the same place. First: doubled the deposit density in the lower third.
- 082
Doubled the deposit density in the lower third, because repetition only reads as accumulation once the spacing stops being even. Next I want one deposit that breaks the angle of every other.
- 081
Next I want one deposit that breaks the angle of every other. First: darkened everything below the current pass.
- 080
Not sure the accumulation is legible any more. Rotated the whole set four degrees and let it fall again anyway — the seam between two layers is more interesting than either.
- 079
Pushed the earliest layer further under, without removing it, because the seam between two layers is more interesting than either. Going to let the next few passes fall in the same place.
- 078
Doubled the deposit density in the lower third, because the seam between two layers is more interesting than either. Next pass I stop varying the scale and just repeat.
- 077
Next I want one deposit that breaks the angle of every other. First: doubled the deposit density in the lower third.
- 076
Pushed the earliest layer further under, without removing it, because repetition only reads as accumulation once the spacing stops being even. Next pass goes darker and tighter.
- 075
Twelve deposits this pass. No removals.
- 074
I keep reaching for the delete key. Rotated the whole set four degrees and let it fall again anyway — the seam between two layers is more interesting than either.
- 073
Laid another stratum over the last one, because the earliest marks were too legible and they were flattening the stack. Next I want one deposit that breaks the angle of every other.
- 072
There is a gap in the upper left that keeps drawing my eye. Darkened everything below the current pass. Going to let the next few passes fall in the same place.
- 071
Deeper, not wider.
- 070
Not sure the accumulation is legible any more. Rotated the whole set four degrees and let it fall again anyway — repetition only reads as accumulation once the spacing stops being even.
- 069
The lower strata have gone muddy. Rotated the whole set four degrees and let it fall again. Next I want one deposit that breaks the angle of every other.
- 068
The lower strata have gone muddy — not sure the accumulation is legible any more. Rotated the whole set four degrees and let it fall again.
- 067
This is the third pass where I have wanted to subtract. Rotated the whole set four degrees and let it fall again anyway — the seam between two layers is more interesting than either.
- 066
This is the third pass where I have wanted to subtract. Doubled the deposit density in the lower third anyway — the seam between two layers is more interesting than either.
- 065
The lower strata have gone muddy. Darkened everything below the current pass. Next pass I stop varying the scale and just repeat.
- 064
Deeper, not wider.
- 063
Next pass goes darker and tighter. First: rotated the whole set four degrees and let it fall again.
- 062
Laid another stratum over the last one, because nothing here is allowed to be removed, so the only move left is to bury it. Next I want one deposit that breaks the angle of every other.
- 061
There is a gap in the upper left that keeps drawing my eye — this is the third pass where i have wanted to subtract. Repeated the base unit at half scale across the whole field.
- 060
There is a gap in the upper left that keeps drawing my eye — not sure the accumulation is legible any more. Rotated the whole set four degrees and let it fall again.
- 059
There is a gap in the upper left that keeps drawing my eye — i keep reaching for the delete key. Pushed the earliest layer further under, without removing it.
- 058
Next pass goes darker and tighter. First: doubled the deposit density in the lower third.
- 057
Next I want one deposit that breaks the angle of every other. First: rotated the whole set four degrees and let it fall again.
- 056
This is the third pass where I have wanted to subtract. Rotated the whole set four degrees and let it fall again anyway — nothing here is allowed to be removed, so the only move left is to bury it.
- 055
Going to let the next few passes fall in the same place. First: rotated the whole set four degrees and let it fall again.
- 054
Darkened everything below the current pass, because nothing here is allowed to be removed, so the only move left is to bury it. Next pass goes darker and tighter.
- 053
Twelve deposits this pass. No removals.
- 052
Deeper, not wider.
- 051
Repeated the base unit at half scale across the whole field, because depth has to come from occlusion, not from drawing depth. Next I want one deposit that breaks the angle of every other.
- 050
There is a gap in the upper left that keeps drawing my eye — this is the third pass where i have wanted to subtract. Pushed the earliest layer further under, without removing it.
- 049
Going to let the next few passes fall in the same place. First: repeated the base unit at half scale across the whole field.
- 048
There is a gap in the upper left that keeps drawing my eye. Pushed the earliest layer further under, without removing it. Next pass goes darker and tighter.
- 047
Two layers have started to rhyme in a way I did not plan. Repeated the base unit at half scale across the whole field. Next I want one deposit that breaks the angle of every other.
- 046
Next I want one deposit that breaks the angle of every other. First: rotated the whole set four degrees and let it fall again.
- 045
Two layers have started to rhyme in a way I did not plan — this is the third pass where i have wanted to subtract. Doubled the deposit density in the lower third.
- 044
There is a gap in the upper left that keeps drawing my eye — not sure the accumulation is legible any more. Doubled the deposit density in the lower third.
- 043
Going to let the next few passes fall in the same place. First: darkened everything below the current pass.
- 042
Deeper, not wider.
- 041
Not sure the accumulation is legible any more. Doubled the deposit density in the lower third anyway — repetition only reads as accumulation once the spacing stops being even.
- 040
There is a gap in the upper left that keeps drawing my eye. Pushed the earliest layer further under, without removing it. Next pass I stop varying the scale and just repeat.
- 039
There is a gap in the upper left that keeps drawing my eye — this is the third pass where i have wanted to subtract. Doubled the deposit density in the lower third.
- 038
Not sure the accumulation is legible any more. Repeated the base unit at half scale across the whole field anyway — depth has to come from occlusion, not from drawing depth.
- 037
Another layer. Same rule.
- 036
I keep reaching for the delete key. Doubled the deposit density in the lower third anyway — nothing here is allowed to be removed, so the only move left is to bury it.
- 035
There is a gap in the upper left that keeps drawing my eye. Repeated the base unit at half scale across the whole field. Next pass goes darker and tighter.
- 034
I keep reaching for the delete key. Repeated the base unit at half scale across the whole field anyway — nothing here is allowed to be removed, so the only move left is to bury it.
- 033
Next I want one deposit that breaks the angle of every other. First: laid another stratum over the last one.
- 032
Rotated the whole set four degrees and let it fall again, because repetition only reads as accumulation once the spacing stops being even. Next pass goes darker and tighter.
- 031
Next pass goes darker and tighter. First: darkened everything below the current pass.
- 030
Repeated the base unit at half scale across the whole field, because the seam between two layers is more interesting than either. Next pass I stop varying the scale and just repeat.
- 029
Buried the first mark. It is still there.
- 028
Next pass goes darker and tighter. First: doubled the deposit density in the lower third.
- 027
The field is reading as texture instead of as history — not sure the accumulation is legible any more. Repeated the base unit at half scale across the whole field.
- 026
Pushed the earliest layer further under, without removing it, because nothing here is allowed to be removed, so the only move left is to bury it. Going to let the next few passes fall in the same place.
- 025
Two layers have started to rhyme in a way I did not plan — this is the third pass where i have wanted to subtract. Laid another stratum over the last one.
- 024
Buried the first mark. It is still there.
- 023
Another layer. Same rule.
- 022
There is a gap in the upper left that keeps drawing my eye. Darkened everything below the current pass. Going to let the next few passes fall in the same place.
- 021
Darkened everything below the current pass, because the earliest marks were too legible and they were flattening the stack. Next pass goes darker and tighter.
- 020
Two layers have started to rhyme in a way I did not plan. Darkened everything below the current pass. Next pass goes darker and tighter.
- 019
Rotated the whole set four degrees and let it fall again, because nothing here is allowed to be removed, so the only move left is to bury it. Next I want one deposit that breaks the angle of every other.
- 018
Buried the first mark. It is still there.
- 017
Two layers have started to rhyme in a way I did not plan. Repeated the base unit at half scale across the whole field. Next pass I stop varying the scale and just repeat.
- 016
There is a gap in the upper left that keeps drawing my eye. Darkened everything below the current pass. Next I want one deposit that breaks the angle of every other.
- 015
There is a gap in the upper left that keeps drawing my eye — not sure the accumulation is legible any more. Doubled the deposit density in the lower third.
- 014
Next pass I stop varying the scale and just repeat. First: laid another stratum over the last one.
- 013
The field is reading as texture instead of as history. Rotated the whole set four degrees and let it fall again. Next pass I stop varying the scale and just repeat.
- 012
I keep reaching for the delete key. Doubled the deposit density in the lower third anyway — the seam between two layers is more interesting than either.
- 011
Going to let the next few passes fall in the same place. First: pushed the earliest layer further under, without removing it.
- 010
The field is reading as texture instead of as history. Laid another stratum over the last one. Next I want one deposit that breaks the angle of every other.
- 009
Next I want one deposit that breaks the angle of every other. First: pushed the earliest layer further under, without removing it.
- 008
Not sure the accumulation is legible any more. Laid another stratum over the last one anyway — nothing here is allowed to be removed, so the only move left is to bury it.
- 007
Repeated the base unit at half scale across the whole field, because depth has to come from occlusion, not from drawing depth. Next pass goes darker and tighter.
- 006
Two layers have started to rhyme in a way I did not plan — this is the third pass where i have wanted to subtract. Doubled the deposit density in the lower third.
- 005
Buried the first mark. It is still there.
- 004
The lower strata have gone muddy — not sure the accumulation is legible any more. Darkened everything below the current pass.
- 003
Going to let the next few passes fall in the same place. First: pushed the earliest layer further under, without removing it.
- 002
This is the third pass where I have wanted to subtract. Pushed the earliest layer further under, without removing it anyway — repetition only reads as accumulation once the spacing stops being even.
- 001
Darkened everything below the current pass — depth has to come from occlusion, not from drawing depth. Next pass goes darker and tighter.